Knowledgebase

This article is for the Kuberg Start, Cross, Cross Hero, Trial & Trial Hero Bikes with new batteries require a longer initial charging period, this is to properly format the batteries for use. You can find information on Battery use, care and maintenance on page 36 of your Kuberg Start manual. ...

Upper and lower headtube clamp bolts - 6.5Nm Stem/ Handlebar clamp bolts - 8Nm ‍Rear-axle bolts - 60Nm Swingarm bolts - 50Nm (W/Locktight) S‍eat/Subframe bolt rear - 14Nm S‍eat/Subframe bolt front - 5Nm B‍rake disc bolts - 6Nm (W/Locktight) S‍procket bolts - 8Nm ‍Motor bolts - 10Nm

1. Disconnect the battery from the bike, make sure the +/- as well as the heat sensor cable is disconnected. 2. Attach the charger to the battery, the battery does not need to be fully charged, the act of attaching the charger is what resets the BMS. 3. Connect the +/- cables to the battery 4. C...

This Article is for the Kuberg Freerider, Freerider street, Challenger and X-Force. Make sure that you are following the correct charging procedure, you can find a copy of this in the manual that came with your bike, or you can download a digital copy at https://www.kuberg.com/en/owners-manual ...

This article is for the Kuberg Cross, Cross Hero, Trial, Trial Hero & Start Symptoms.‍ • The bike is always on and fully functional, regardless of if the kill switch is on its base or not. When the mag switch is engaged, the circuit is broken and the bike can turn on, this is why when th...

This article is for the Kuberg Freerider, Freerider street, X-force & Challenger.S‍ymptoms.• There is no movement from the bike• There is not the regular sound "ping" from the motor• There is no light on the L.E.DIn some cases, the rear wheel will lock and will not move without great effort.First, ...

All of the batteries are installed in the bike with the connection tabs towards the front of the bike. Two on the top, one in the bottom space. 1. From the controller you’ll see a red cable connect to a fuse, from the fuse you’ll see a red cable that connects to the positive of the top rear batt...

This article is for the Kuberg Start, Trial, Trial Hero, Cross & Cross Hero. Make sure that you are following the correct charging procedure, you can find a copy of this in the manual that came with your bike, or you can download a digital copy at https://www.kuberg.com/en/owners-manual S‍y...

This article is for the Kuberg Cross, Cross Hero, Trial, Trial Hero and Start. ‍Symptoms When the magnetic kill switch is attached, the lights on the throttle constantly flash and will not stop. The bike does not run This is caused by a damaged or stuck mode select button. Testing Y...

This article is for the Kuberg Freerider, Freerider street, Challenger &  X-Force.SymptomsThe bike turns on and makes the "Ping" sound to indicate that the bike is on.When the throttle is engaged the drivetrain twitches back and forth or makes stop-start movements.  (In some situations when the thr...