bikesparts VIN Search Knowledgebase USDEURGBPCZK Search VIN:

Selecting a mode on the PIT-Bike

To change the mode of the motorcycle, the magnetic kill switch should be in place and the button on the underside, underneath the controller should be turned on, (it will illuminate red when on(Please see picture attached))

If you can hear pinging noises from the motor turn the throttle slightly until this stops.

Then click the button next to the illuminated button (See picture)
Once for mode one,
Twice for mode two,
Three times for mode three.

The mode will be confirmed by a number of beeps corresponding to the mode you have selected.
No rating has been done yet.
Only registered users can rate