Pit Bike: Selecting a torque mode

Follow these steps to change the torque mode of the motorcycle:

Turn the motorcycle kill switch ON (magnet attached).
The power LED, which is located on the left lower side of the motorcycle, should illuminate red.
If You can hear pinging noises from the motor, turn the throttle just slightly, until the noises stop.
Click the mode button, located under the power LED. Each pressing of the button will be confirmed by a number of beeps (1, 2 or 3) representing the selected mode 1, 2 or 3:
1 beep - Beginner mode (low torque and power consumption)
2 beeps - Sport mode (medium torque)
3 beeps - Race mode (unlimited torque)

Photos

Rating:

No rating has been done yet.

Only registered users can rate