bikesparts VIN Search Knowledgebase USDEURGBPCZK Search VIN:

Mounting the front fender

When mounting the front fender to the Freerider, the Kuberg head badge will first need to be moved to make room underneath for the new fender.

1. Remove the badge from the front of the Freerider
2‍. Remove the support bracket that the badge was attached too, there are two bolts on the underside of the fork crown.
3. Install the support bracket to the top of the fork crown (the other side of where the bolts were removed)
4. Re-attach the badge

The fork will now be able to be installed.
No rating has been done yet.
Only registered users can rate