Mag switch base| Bike always on

This only applies to bikes manufactured with the new system (2019)

When the base for the magnet fails, a signal will be sent indicating that the magnet is in its place and the bike should turn on.
This is true when connected to the battery or the controller.

T‍he mag switch will show continuity when measured with a voltmeter.

If the customer does not have a multimeter/voltmeter, you can remove the mag switch connection from the battery and replace it with the connector that loops into itself (once removed from the controller)
If the bike turns on again when the magnetic kill switch base is attached to the controller connection WITHOUT the magnet attached, then this confirms that the magnetic kill switch is the issue.